[cisco-voip] ATA190 Plar SIP Dial Rule

[Barry Howser]

So I have tried it with the 190 and the 187 so far and WITHOUT a SIP dial
rule and just a SCCP PLAR config I just get tone. When I add in a SIP dial
rule (configured with a button parameter of either 1 or 2) I get dial tone
for a few seconds, then dumps to a fast busy. I know the SCCP plar portion
is working because if I apply it to a SCCP phone or an ATA186, works just
great.

My CUCM version is 8.6 so I had to add the device pack for the ATA190, but
still, I haven't seen any referenced docs that state it doesn't work. I
think I am going to try the TAC route. I'll let everyone know what comes of
it.



On Fri, Mar 13, 2015 at 3:50 PM, James Avalos <javalos at adobe.com> wrote:

>  I was attempting something similar, several months back.  I received
> confirmation from TAC that PLAR is currently not supported with the ATA190.
>
> Again, this was back in November of last year.  I can’t say whether or not
> this has been addressed/corrected since then.  But my case notes state that
> I basically had to pound sand on that request…..
>
>
>
> - J
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Barry Howser
> *Sent:* Friday, March 13, 2015 12:30 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] ATA190 Plar SIP Dial Rule
>
>
>
> Hello everyone.
>
> I have an ATA190 that needs to do a plar to 911. My dial plan uses "9" to
> access an outside line (including the 911 pattern).
>
> I created a SIP dial rule and added a plar pattern. I added a parameter
> called "911" in the description and then added 9911 in the value field. I
> saved, applied config and restarted.
>
> I have applied that SIP Dial Rule to the ATA190 device's sip dial rule
> section and reset the ATA. When I take either of the lines off hook with an
> analog phone, I just get dial tone .... no PLARing.
>
> What am I doing wrong?
>
> thanks
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150313/946d01b1/attachment.html>