[cisco-voip] R: Re: R: ATA190 Random De-Register from CUCM 10.5.2

Tue Mar 24 05:40:16 EDT 2015

Hi Ryan and thank you very much for your assistance.
Here the output from the Publisher CLI (Mi cluster is a standalone cluster, no SUB present)
Command Line Interface is starting up, please wait ...
   Welcome to the Platform Command Line Interface
VMware Installation:        2 vCPU: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz        Disk 1: 80GB, Partitions aligned        4096 Mbytes RAM
admin:show versioadmin:show version actadmin:show version active Active Master Version: 10.5.2.10000-5Active Version Installed Software Options: cmterm-9951.9-4-2SR1-2.copcm-locale-it_IT-10.5.2.1000-1.copcmterm-78xx.10-1-1SR2-1.copcmterm-78xx.10-2-1-12SR1-4.copcmterm-ata190.1-1-2-005.copcmterm-78xx.10-1-1-9.copcmterm-ata190-qed.1-1-2-005.copadmin:
Let me know if you need further information.
Regards
Alessandro

----Messaggio originale----

Da: ryanhuff at outlook.com

Data: 23-mar-2015 21.46

A: <bertacco.alessandro at alice.it>, <rdawson at force3.com>, <cisco-voip at puck.nether.net>

Ogg: Re: R: [cisco-voip] ATA190 Random De-Register from CUCM 10.5.2

Can you hop into CLI and show me the output of "show version active".
Also, make sure that output is the same on all cluster nodes.
Thanks,
Ryan

-------- Original Message --------
From: Alessandro Bertacco <bertacco.alessandro at alice.it>
Sent: Monday, March 23, 2015 04:10 PM
To: 'Rob Dawson' <rdawson at force3.com>,'Ryan Huff' <ryanhuff at outlook.com>,cisco-voip at puck.nether.net
Subject: R: [cisco-voip] ATA190 Random De-Register from CUCM 10.5.2

Hi Rob, in my case all the two lines are configured and used! Regards Alessandro Da: Rob Dawson [mailto:rdawson at force3.com] 
Inviato: lunedì 23 marzo 2015 15:47
A: Ryan Huff; Alessandro Bertacco; cisco-voip at puck.nether.net
Oggetto: RE: [cisco-voip] ATA190 Random De-Register from CUCM 10.5.2 There used to be a defect where ATAs with only one line configured/registered would deregister due to the second line constantly attempting to download a configuration. I am not sure if it only impacted the 18X or not though . . . I’ll try to find an article. Rob      From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Huff
Sent: Monday, March 23, 2015 9:20 AM
To: Alessandro Bertacco; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ATA190 Random De-Register from CUCM 10.5.2 I've used the ATA190 and it's family of 18X pretty often. In the case of the SIP devices like the 190 or 187 I have always been able to use the default SIP Profile settings; of course I'm generally dealing with vanilla networks and CCM's built very closely to the SRND.

Here is where I would start (if you haven't already):

What do you have the device security mode set to? If you have it set to Authenticated or Encrypted but it has not received a CTL file, the phone will attempt registration up to four times to make a secure connection.

Are the MAC addresses for Phone 1 and Phone 2 correct (Phone 2 will usually loose the first two characters and append a 01 at the end of the device name). If you support auto registration, remove the devices and let them auto register and see if they stabilize.

Any layer 1/2 issues (change out the patch cable, check the connection into the switchport ... etc)? Do you see any interface drops on the switchport? Is the switchport full duplex 10/100 or 10/1000? Have you shut/no shut the port just to see if clearing the port helps?

Go through the IVR menu on the ATA itself and verify that it reports all the same settings that you CCM device configs show. http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/190/1_0/english/administration/guide/sip/ATA190/a190_agBcd.html

Thanks,

Ryan From: bertacco.alessandro at alice.it
To: cisco-voip at puck.nether.net
Date: Mon, 23 Mar 2015 11:28:44 +0100
Subject: [cisco-voip] ATA190 Random De-Register from CUCM 10.5.2Hi Guys,   ATA190 FW version 1.1.2.(005) with CUCM 10.5.2.10000-5, de-register randomly, and need to reboot the device to re-register again on the CUCM. Anyone as the same issue? Do you use a special SIP Device profile changing some timings, or you are using standard SIP Device Profile? Thank you all Regards  Alessandro Bertacco 
_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150324/ae5820e0/attachment.html>