[cisco-voip] QOS - Looking for another set of eyeballs

[Nick Britt]

Hi Ryan, I am no QOS expert either but I think you will need to match the
protocol RTP Audio, to pickup any packets that haven't been marked with EF,
although I think the standard phone template in CUCM does this.

class-map match-all VOICE
 match protocol rtp audio


On Sat, May 2, 2015 at 11:55 PM, Ryan Huff <ryanhuff at outlook.com> wrote:

> The below OUT map, applied in the output direction on a WAN(mpls) facing
> interface, should put RTP, Signaling and anything from access-list 51 at
> the top of the heap and give everything else best effort.
>
> Not that anything isn't working, I just want to make sure I'm not making
> something up ... etc. Seems basic but I don't get to play with QOS everyday
> :)
>
> router-3925#sh run | sec class-map|policy-map|access-list 51
> !
> !
> class-map match-all VOICE
>  match ip dscp ef
>  match access-group 51
> class-map match-any CALL-SIGNALING
>  match ip dscp cs3
>  match ip dscp af31
> !
> !
> policy-map WAN-OUT
>  class VOICE
>   bandwidth percent 30
>  class CALL-SIGNALING
>   bandwidth percent 10
>  class class-default
>   fair-queue
> !
> !
> access-list 51 permit 001.002.003.004 0.0.0.255
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
- Nick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150504/44e837d1/attachment.html>