[cisco-voip] ATA190 Registration Failed

[Brian Meade]

It looks like these traces are from a backup CCM node in the CM Group.  You
can see the expires=0 in the Register message and the 200OK so it is
instantly un-registering.  That's usually how SIP devices keep status on a
failover server.

Do you have the logs from the primary node?

On Tue, May 26, 2015 at 4:57 PM, Alessandro Bertacco <
bertacco.alessandro at alice.it> wrote:

>
>
> Hi all, we have issue with ATA190 (FW version 1.1.2(0.05) that don't
> register with our CUCM 10.5.x.
>
>
>
> (Changing the ATA190 device, issue persist)
>
>
>
> Cluster of one node in mixed mode, but we don’t use encryption to the
> endpoint. Standard non secure profile are used.
>
>
>
> The device is already configured from Communication Manager Side, with the
> mac-address and DN. TFTP server is correctly issued on theATA190 adapter,
> but from the Web interface I can see registration failed. (Also from CUCM
> side)
>
>
>
> From the Communication Manager, I've captured some SDL log regarding the
> Registration request sent from the ATA90 that the ip address is
> 192.168.121.52, and primary MAC addres is: 34DBFD186BCA.
>
>
>
> The trace is attached to this email.
>
>
>
> Any idea?
>
>
>
> Thank you for your time
>
>
>
> Regards
>
>
>
> --
>
> Alessandro Bertacco
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150526/713195a9/attachment.html>