[cisco-voip] Baud rate on an analog port

[Rob Dawson]

You would change the rate on the device itself, a call to the processor may help if you don’t know how. The only time the gateway would have anything to do with the negotiation of rates is if you were using t.38.

Rob Dawson

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of norm.nicholson at kitchener.ca
Sent: Tuesday, November 03, 2015 8:46 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Baud rate on an analog port


Is there a way to increase or decrease the baud rate on an analog port. I have some debit machines that are acting flaky and want to see if changing the baud rate helps.



Thanks





Norm Nicholson
Telecom Analyst
City of Kitchener
(519) 741-2200 x 7000


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20151103/c55c2183/attachment.html>