[cisco-voip] Baud rate on an analog port

[Daniel Pagan]

I agree with Ryan on configuring it local on the device. Altering transmission rates on an analog signal via IOS command line, in my experience, only applies to situations where the terminating and originating gateways are using a fax relay protocol. In that scenario, the gateways are able to strip and modify rate speed and capabilities, but this does not apply to standard analog communication over a Cisco voice gateway sans a relay protocol.

Dan
-------

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Huff
Sent: Tuesday, November 03, 2015 10:43 AM
To: norm.nicholson at kitchener.ca; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Baud rate on an analog port


Generally, the transmission rates will be controlled by the actual device transmitting the signal. My experience with credit card machines is that they have an option buried within their menu system for changing it or you have to call the machine's vendor and they can walk you through it.



What type of trouble are you experiencing with the machine?





________________________________
From: cisco-voip <cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>> on behalf of norm.nicholson at kitchener.ca<mailto:norm.nicholson at kitchener.ca> <norm.nicholson at kitchener.ca<mailto:norm.nicholson at kitchener.ca>>
Sent: Tuesday, November 3, 2015 8:46 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] Baud rate on an analog port




Is there a way to increase or decrease the baud rate on an analog port. I have some debit machines that are acting flaky and want to see if changing the baud rate helps.







Thanks











Norm Nicholson

Telecom Analyst

City of Kitchener

(519) 741-2200 x 7000




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20151103/4236c68f/attachment.html>