[cisco-voip] CUCM Upgrade failure...

Sun Nov 15 22:35:56 EST 2015

Looks healthy ...

I recall trying PCD once and I hit really strange issues too. For that upgrade, I ultimately abandoned PCD and built new VMs with the Answer File Generator then a DRS backup/restore.

Not sure where you are in your timeline or if it is that important but it is definitely something I would consider. Sometimes you can spend more time trying to get the silly tools to work, than to just do the work yourself.

Google is littered with PCD weirdness; great idea of an application, just not there yet IMO.

-Ryan

Sent from my iPad
On Nov 15, 2015, at 10:19 PM, Jonathan Charles <jonvoip at gmail.com<mailto:jonvoip at gmail.com>> wrote:

Everything looks good....

admin:utils ntp status
ntpd (pid 19674) is running...

     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
 127.127.1.0     .LOCL.          10 l   21   64  377    0.000    0.000   0.001
 10.0.31.2       10.0.31.3        3 u  175 1024  377    0.635   -5.771   2.042
*10.0.31.3       129.6.15.29      2 u  970 1024  377    0.510  -11.340   0.449
 10.1.31.2       10.0.31.3        3 u  490 1024  377    0.850   -9.114   4.881
+10.1.31.3       129.6.15.29      2 u  184 1024  377    0.817   -4.085   5.355

synchronised to NTP server (10.0.31.3) at stratum 3
   time correct to within 68 ms
   polling server every 1024 s

Current time in UTC is : Mon Nov 16 03:16:14 UTC 2015
Current time in America/Chicago is : Sun Nov 15 21:16:14 CST 2015
admin:

admin:utils diagnose module validate_network

Log file: platform/log/diag1.log

Starting diagnostic test(s)
===========================
test - validate_network    : Passed

Diagnostics Completed

admin:#

admin:utils dbreplication runtimestate

DB and Replication Services: ALL RUNNING

Cluster Replication State: Replication repair command started at: 2014-06-20-23-22
     Replication repair command COMPLETED 541 tables processed out of 541
     Errors or Mismatches Were Found:

     Use 'file view activelog cm/trace/dbl/sdi/ReplicationRepair.2014_06_20_23_22_51.out' to see the details

DB Version: ccm8_6_2_20000_2
Number of replicated tables: 541

Cluster Detailed View from PUB (5 Servers):

                                PING            REPLICATION     REPL.   DBver&  REPL.       REPLICATION SETUP
SERVER-NAME     IP ADDRESS      (msec)  RPC?    STATUS          QUEUE   TABLES  LOOP?       (RTMT) & details
-----------     ------------    ------  ----    -----------     -----   ------- -----       -----------------
IPTCMS02  10.0.126.12     0.196   Yes     Connected       0       match   Yes         (2) Setup Completed
IPTCMS01  10.0.126.11     0.151   Yes     Connected       0       match   Yes         (2) Setup Completed
IPTCMP    10.0.126.10     0.065   Yes     Connected       0       match   Yes         (2) PUB Setup Completed
IPTCMS03  10.1.126.13     0.545   Yes     Connected       0       match   Yes         (2) Setup Completed
IPTCMS04  10.1.126.14     0.527   Yes     Connected       0       match   Yes         (2) Setup Completed

admin:

On Sun, Nov 15, 2015 at 9:14 PM, Ryan Huff <ryanhuff at outlook.com<mailto:ryanhuff at outlook.com>> wrote:
Also worth noting that if CCM NTP is synchronized to a Windows server (even if it shows Stratum 3 or better); that is a problem you'll need to correct as SNTP can play hell with UCOS and do some pretty weird stuff.

Thanks,

Ryan

On Nov 15, 2015, at 10:06 PM, Ryan Huff <ryanhuff at outlook.com<mailto:ryanhuff at outlook.com>> wrote:

If the FROM CCM version was unrestricted, it would say "Unrestricted" after the version number on the "Active Master Version" line. If it does not say "Unrestricted", then it is the more common restricted version.

As to your original issue, I would start with all the usual suspects. Is the FROM CCM cluster healthy to start with; dns, ntp, replication ... etc?

>From CCM:

1.) #utils diagnose module validate_network
        (Should see Passed)

2.) #utils ntp status
        (Pub should be synchronized and Strata 3 or better)

3.) #utils dbreplication runtimestate
        (Should see 2 - Setup Completed for all nodes)

If PCD is moving the apps to a new platform/chassis, make sure the target environment can reach all the same network assets as the from environment.

Thanks,

Ryan

On Nov 15, 2015, at 9:34 PM, Jonathan Charles <jonvoip at gmail.com<mailto:jonvoip at gmail.com>> wrote:

It just says the version number...

admin:show version active
Active Master Version: 8.6.2.20000-2
Active Version Installed Software Options:
cmterm-7942_7962-sccp.9-3-1ES27-rel.cop
cmterm-devicepack8.6.2.24118-1.cop
ciscocm.refresh_upgrade_v1.1.cop
ciscocm.ucmap_platformconfig.cop
ciscocm.migrate-export-v1.12.cop
admin:

Jonahan

On Sun, Nov 15, 2015 at 7:26 PM, Ryan Huff <ryanhuff at outlook.com<mailto:ryanhuff at outlook.com>> wrote:
Did you actually dump the logs to a serial interface (curious what it shows)?

On the FROM CCM, goto the CLI of pub (or sub) and do a "show version active"; it will tell you if you have the UNREST.

Thanks,

Ryan

> On Nov 15, 2015, at 7:55 PM, Jonathan Charles <jonvoip at gmail.com<mailto:jonvoip at gmail.com>> wrote:
>
> Using PCD on CUCM 10.5.2.11901 got the following error:
>
> <image.png>
>
> It seems to imply I am not matching restricted vs. unrestricted...
>
> Any easy way to find out?
>
>
>
> Jonathan
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20151116/38a7b95e/attachment.html>