[cisco-voip] BFL Pickup button

[Michael T. Voity]

Hello,

My system is CUCM 10.5.2.12900-14

I have 1 7962 (67522)  that has 2 BLF buttons on it for 2 other phones, 
7962 & 7942 phones,  (67520 and 67521).   The BLF works fine for when i 
see them off hook and when I press the button to call them.

In the BLF config I clicked "Call Pickup"

On my 7962 (67522)  the amber light flashes when  the other phone is 
ringing .    I press the flashing amber button (67520)  and I get a fast 
busy and on the bottom it says"Key is not active"

I have made sure the lines and phones subscribe-css is correct in all 
the right places.   I am scratching my head....

I have stalked around google and the cisco forums and can not figure it out

I did see a post out there that mentions that I need to configure a 
"Call Pickup Group"    When that is done, I loose my extensions. unless 
I'm doing it wrong?

Ideas?

Thanks,

-Mike

-- 
Michael T. Voity
Network Engineer
University of Vermont

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20151116/44277566/attachment.html>