[cisco-voip] BLF Pickup button

[Michael T. Voity]

Neal,

Thanks for the response,    That thought did cross my mind,  the users 
didn't want it that feature.

-Mike

Michael T. Voity
Network Engineer
University of Vermont


On 11/16/2015 10:19, Haas, Neal wrote:
>
> Why don’t you configure it as a Line if you want to pick it up?
>
> Thank you,
>
> Neal Haas
>
> *From:*cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On 
> Behalf Of *Michael T. Voity
> *Sent:* Monday, November 16, 2015 5:42 AM
> *To:* voip puck
> *Subject:* [cisco-voip] BFL Pickup button
>
> Hello,
>
> My system is CUCM 10.5.2.12900-14
>
> I have 1 7962 (67522)  that has 2 BLF buttons on it for 2 other 
> phones, 7962 & 7942 phones,  (67520 and 67521).   The BLF works fine 
> for when i see them off hook and when I press the button to call them.
>
> In the BLF config I clicked "Call Pickup"
>
> On my 7962 (67522)  the amber light flashes when  the other phone is 
> ringing .    I press the flashing amber button (67520)  and I get a 
> fast busy and on the bottom it says"Key is not active"
>
> I have made sure the lines and phones subscribe-css is correct in all 
> the right places.   I am scratching my head....
>
> I have stalked around google and the cisco forums and can not figure 
> it out
>
> I did see a post out there that mentions that I need to configure a 
> "Call Pickup Group"    When that is done, I loose my extensions. 
> unless I'm doing it wrong?
>
> Ideas?
>
> Thanks,
>
> -Mike
>
> -- 
> Michael T. Voity
> Network Engineer
> University of Vermont

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20151116/85cda8bd/attachment.html>