[cisco-voip] CAD client Focus

[Ryan Huff]

There should be some options under the miscellaneous tab of Desktop Administrator that allow you to change this. Additionally, some users have stated that under certain operating environment conditions they have had to modify the RegKey ForegroundLockTimeout to DEC 200000.
 
Thanks,
 
Ryan
 
Date: Thu, 15 Oct 2015 15:49:05 -0700
From: svoll.voip at gmail.com
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CAD client Focus

we upgraded from UCCx 8.5 to 10.6.  in 8.5 you could setup the CAD client to NOT take the focus on the screen.
Now, no matter what we try, the CAD client always takes focus as soon as the phone rings.  Anyone know how to change that?
TIA
Scott


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20151015/44c74585/attachment.html>