[cisco-voip] UCME to CUCM integration

[Henry Gicheru (KE)]

   Hi Guys,

Please assist here.
Have this setup; Added the CUCME router as a H323 Gateway on the CUCM and created a route pattern pointing to that gateway. On CUCME, I have added some dial peers pointing to the CUCM nodes. The CUCME router has IOS 15.4(3) and the IP Phones are 7821.
Calls from CUCM to CUCME completely successfully and communication is happening. Calls from CUCME to CUCM to both SCCP and SIP IP phones disconnect with 10 seconds of being answered.
Have also tried using SIP trunk but the results are the same.


Regards,
Henry Gicheru
System Engineer
Dimension Data
Tel: +25420 499 3000
Mobile: +254733477307
Fax:+254204993200
henry.gicheru at dimensiondata.com

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20151022/49e157e3/attachment.html>