[cisco-voip] CUBE - Dial-peer multiple destination-pattern matching

[Ed Leatherman]

I don't have any experience with the file based patterns. If they have room
for a few more VM's, putting SME in the middle and hang CUBE off of that
might be another way to do it cleanly. Then ils could take care of those
patterns.

On Mon, Oct 26, 2015 at 5:42 AM, Boon <ciscovoipuser at gmail.com> wrote:

> I have a client who is planning on splitting their single CUCM cluster
> with CUBE and PSTN SIP into two separate clusters.
>
> The challenge is that they want to share the CUBE solution and DID range
> between both clusters.
>
> I can see an opportunity here to use the IOS dial-peer feature 'Multiple
> Destination Pattern' matching using a file hosted in the router flash.
>
> Although the configuration looks pretty straight forward I wanted to find
> out if any of you guys had deployed this feature and whether there are any
> gotchas to be aware of? I'm aware of the minimum IOS version requirement.
> I'm wondering whether file maintenance can become an issue.
>
> Also, has anyone used this with a CUBE HA solution?
>
> Any help appreciated. Thanks
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Ed Leatherman
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20151026/cfadcff6/attachment.html>