[cisco-voip] CUBE - Dial-peer multiple destination-pattern matching

Brian Meade bmeade90 at vt.edu
Mon Oct 26 11:16:31 EDT 2015

You may be able to use SAF for this and have the 2 clusters advertise their
DNs to the CUBE acting as a SAF Forwarder and SAF Client.

On Mon, Oct 26, 2015 at 5:42 AM, Boon <ciscovoipuser at gmail.com> wrote:

> I have a client who is planning on splitting their single CUCM cluster
> with CUBE and PSTN SIP into two separate clusters.
> The challenge is that they want to share the CUBE solution and DID range
> between both clusters.
> I can see an opportunity here to use the IOS dial-peer feature 'Multiple
> Destination Pattern' matching using a file hosted in the router flash.
> Although the configuration looks pretty straight forward I wanted to find
> out if any of you guys had deployed this feature and whether there are any
> gotchas to be aware of? I'm aware of the minimum IOS version requirement.
> I'm wondering whether file maintenance can become an issue.
> Also, has anyone used this with a CUBE HA solution?
> Any help appreciated. Thanks
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20151026/00673cd0/attachment.html>

More information about the cisco-voip mailing list