[cisco-voip] UCM physical 8.6.2 to VM 10.5

[Ed Leatherman]

Scott,

There is an excellent session from Cisco Live this year (San Diego) that
you can get for free online that goes over all the upgrade steps and
licensing in excruciating detail for exactly what you're doing - I don't
remember the title but Brandon Ta was the presenter. It would be a good one
to check out. I'll dig through my notes and see if I can find the session
title.

On Tue, Sep 1, 2015 at 3:44 PM, Scott Voll <svoll.voip at gmail.com> wrote:

> I've been looking through the list to find some more answers, but i'm
> really looking for real world experience.
>
> We plan to use PCD to upgrade our CM from MCS servers on 8.6.2 to VM's on
> 10.5.  Sounds like this is a pretty easy way to go.  Can someone confirm or
> deny.  What are some pitfalls?
>
> It's been two years since I went to cisco live so my knowledge is a bit
> dated.
>
> when it comes to licensing, what should I be doing before, during, and
> after?  I remember something about drive to 9 or 10 and having to do some
> stuff before, but I don't remember.  Anyone have some real world experience
> doing the 8.6 to 10.x licensing?  We are 99% EM.  Running mainly 7961
> phones.
>
> TIA
>
> Scott
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Ed Leatherman
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150901/edca155e/attachment.html>