[cisco-voip] Comcast PRI in US and calls to international missing US country code +1

[NateCCIE]

I've never had much success manipulating it.  With all of the NNIs it seems
to be hit or miss.  I have had places where I have different dedicated LD
providers and some will send good full number to a country and others wont.

 

You could try just 11D and see if the far end any happier.

 

-Nate

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
Jason Aarons (AM)
Sent: Thursday, September 24, 2015 9:31 AM
To: cisco-voip <cisco-voip at puck.nether.net>
Subject: [cisco-voip] Comcast PRI in US and calls to international missing
US country code +1

 

Customer has a Comcast Business PRI.  

 

I am sending the Calling Party Number as 10 Digits and Type/National with
Plan/ISDN for calls to Austria.

 

Problem is Austria is not seeing the +1 country code for calls coming in.

 

Comcast Support is taking a long time to tell me what the Type/Plan is they
want to see on outgoing International calls.  If I send a 1 with Type
International they give a switch error.   Anyone worked with Comcast
Business PRIs before?

 

Sep 23 12:42:48.830: ISDN Se0/1/0:23 Q931: TX -> SETUP pd = 8  callref =
0x00E4 

        Bearer Capability i = 0x8090A2 

                Standard = CCITT 

                Transfer Capability = Speech  

                Transfer Mode = Circuit 

                Transfer Rate = 64 kbit/s 

        Channel ID i = 0xA98397 

                Exclusive, Channel 23 

        Display i = 'DiData TEST' 

        Calling Party Number i = 0x2181, '2484135692' 

                Plan:ISDN, Type:National 

        Called Party Number i = 0x80, '01143577336616' 

                Plan:Unknown, Type:Unknown

*Sep 23 12:42:48.846: ISDN Se0/1/0:23 Q931: RX <- CALL_PROC pd = 8  callref
= 0x80E4 

        Channel ID i = 0xA98

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150924/a205cc1e/attachment.html>