[cisco-voip] MWI Light UCM 8

[Cannizzaro, Vince]

David,
Also if it’s Unity Connection, I’ve had some success in the past restarting the  Notifier service

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Charles Goldsmith
Sent: August-03-16 10:05 AM
To: David Zhars
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MWI Light UCM 8

David, if you are on Unity Connection, then its under Telephony Integrations > Phone System.  There is a button labeled Run to Synchronize all MWIs on this phone system.

It's been many moons since I've had to touch Unity, and don't remember the menu system, nor do I have access to one.

On Tue, Aug 2, 2016 at 7:28 PM, David Zhars <dzhars at gmail.com<mailto:dzhars at gmail.com>> wrote:
Getting multiple reports from users that the MWI light is being mischievous....staying on when they have no messages, and not coming on when they do have messages.
I understand there is some sort of system refresh I can do, but can't find it.  We use UCM and Unity 8.0
This just started happening after years of perfect behavior....
Dave

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160803/d9da6834/attachment.html>