[cisco-voip] MWI Light UCM 8

[David Zhars]

I am wondering if it has anything to do with this:

We have two UCMs and one Unity.  When I go into Unity, Telephony
Integration, Phone System, Edit AXL Server, I only show the IP address of
one UCM (the one currently in Standby).  Does Unity need to know about both?

Dave

On Wed, Aug 3, 2016 at 10:34 AM, Cannizzaro, Vince <
Vince.Cannizzaro at hamilton.ca> wrote:

> David,
>
> Also if it’s Unity Connection, I’ve had some success in the past
> restarting the  Notifier service
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Charles Goldsmith
> *Sent:* August-03-16 10:05 AM
> *To:* David Zhars
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] MWI Light UCM 8
>
>
>
> David, if you are on Unity Connection, then its under Telephony
> Integrations > Phone System.  There is a button labeled Run to Synchronize
> all MWIs on this phone system.
>
>
>
> It's been many moons since I've had to touch Unity, and don't remember the
> menu system, nor do I have access to one.
>
>
>
> On Tue, Aug 2, 2016 at 7:28 PM, David Zhars <dzhars at gmail.com> wrote:
>
> Getting multiple reports from users that the MWI light is being
> mischievous....staying on when they have no messages, and not coming on
> when they do have messages.
>
> I understand there is some sort of system refresh I can do, but can't find
> it.  We use UCM and Unity 8.0
>
> This just started happening after years of perfect behavior....
>
> Dave
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160805/d0008ded/attachment.html>