[cisco-voip] MWI Light UCM 8

James Buchanan james.buchanan2 at gmail.com
Fri Aug 5 10:00:14 EDT 2016


Are you running Unity or Unity Connection? Do you have a cluster or just a
single server?

On Fri, Aug 5, 2016 at 9:53 AM, Brian Meade <bmeade90 at vt.edu> wrote:

> That's only used for pulling in CUCM users via AXL.  Under the Port Group
> configuration, you want to have multiple CUCM servers listed for redundancy
> but the others are only used in the case of the primary being down.
>
> On Fri, Aug 5, 2016 at 9:40 AM, David Zhars <dzhars at gmail.com> wrote:
>
>> I am wondering if it has anything to do with this:
>>
>> We have two UCMs and one Unity.  When I go into Unity, Telephony
>> Integration, Phone System, Edit AXL Server, I only show the IP address of
>> one UCM (the one currently in Standby).  Does Unity need to know about both?
>>
>> Dave
>>
>> On Wed, Aug 3, 2016 at 10:34 AM, Cannizzaro, Vince <
>> Vince.Cannizzaro at hamilton.ca> wrote:
>>
>>> David,
>>>
>>> Also if it’s Unity Connection, I’ve had some success in the past
>>> restarting the  Notifier service
>>>
>>>
>>>
>>> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On
>>> Behalf Of *Charles Goldsmith
>>> *Sent:* August-03-16 10:05 AM
>>> *To:* David Zhars
>>> *Cc:* cisco-voip at puck.nether.net
>>> *Subject:* Re: [cisco-voip] MWI Light UCM 8
>>>
>>>
>>>
>>> David, if you are on Unity Connection, then its under Telephony
>>> Integrations > Phone System.  There is a button labeled Run to Synchronize
>>> all MWIs on this phone system.
>>>
>>>
>>>
>>> It's been many moons since I've had to touch Unity, and don't remember
>>> the menu system, nor do I have access to one.
>>>
>>>
>>>
>>> On Tue, Aug 2, 2016 at 7:28 PM, David Zhars <dzhars at gmail.com> wrote:
>>>
>>> Getting multiple reports from users that the MWI light is being
>>> mischievous....staying on when they have no messages, and not coming on
>>> when they do have messages.
>>>
>>> I understand there is some sort of system refresh I can do, but can't
>>> find it.  We use UCM and Unity 8.0
>>>
>>> This just started happening after years of perfect behavior....
>>>
>>> Dave
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160805/f8b89524/attachment.html>


More information about the cisco-voip mailing list