[cisco-voip] MWI Light UCM 8

[James Buchanan]

I remember having to restart the Unity services back in the day. Not
rebooting the server, but rather restarting the services. I do not remember
which service this is, but I'd restart them all and try the resync again.

On Fri, Aug 5, 2016 at 10:01 AM, David Zhars <dzhars at gmail.com> wrote:

> Unity.  8.0
>
> Just one Unity.  Two UCMs.  Version 8.0 as well.
>
> On Fri, Aug 5, 2016 at 10:00 AM, James Buchanan <james.buchanan2 at gmail.com
> > wrote:
>
>> Are you running Unity or Unity Connection? Do you have a cluster or just
>> a single server?
>>
>> On Fri, Aug 5, 2016 at 9:53 AM, Brian Meade <bmeade90 at vt.edu> wrote:
>>
>>> That's only used for pulling in CUCM users via AXL.  Under the Port
>>> Group configuration, you want to have multiple CUCM servers listed for
>>> redundancy but the others are only used in the case of the primary being
>>> down.
>>>
>>> On Fri, Aug 5, 2016 at 9:40 AM, David Zhars <dzhars at gmail.com> wrote:
>>>
>>>> I am wondering if it has anything to do with this:
>>>>
>>>> We have two UCMs and one Unity.  When I go into Unity, Telephony
>>>> Integration, Phone System, Edit AXL Server, I only show the IP address of
>>>> one UCM (the one currently in Standby).  Does Unity need to know about both?
>>>>
>>>> Dave
>>>>
>>>> On Wed, Aug 3, 2016 at 10:34 AM, Cannizzaro, Vince <
>>>> Vince.Cannizzaro at hamilton.ca> wrote:
>>>>
>>>>> David,
>>>>>
>>>>> Also if it’s Unity Connection, I’ve had some success in the past
>>>>> restarting the  Notifier service
>>>>>
>>>>>
>>>>>
>>>>> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On
>>>>> Behalf Of *Charles Goldsmith
>>>>> *Sent:* August-03-16 10:05 AM
>>>>> *To:* David Zhars
>>>>> *Cc:* cisco-voip at puck.nether.net
>>>>> *Subject:* Re: [cisco-voip] MWI Light UCM 8
>>>>>
>>>>>
>>>>>
>>>>> David, if you are on Unity Connection, then its under Telephony
>>>>> Integrations > Phone System.  There is a button labeled Run to Synchronize
>>>>> all MWIs on this phone system.
>>>>>
>>>>>
>>>>>
>>>>> It's been many moons since I've had to touch Unity, and don't remember
>>>>> the menu system, nor do I have access to one.
>>>>>
>>>>>
>>>>>
>>>>> On Tue, Aug 2, 2016 at 7:28 PM, David Zhars <dzhars at gmail.com> wrote:
>>>>>
>>>>> Getting multiple reports from users that the MWI light is being
>>>>> mischievous....staying on when they have no messages, and not coming on
>>>>> when they do have messages.
>>>>>
>>>>> I understand there is some sort of system refresh I can do, but can't
>>>>> find it.  We use UCM and Unity 8.0
>>>>>
>>>>> This just started happening after years of perfect behavior....
>>>>>
>>>>> Dave
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> cisco-voip mailing list
>>>>> cisco-voip at puck.nether.net
>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160805/4457ad7e/attachment.html>