[cisco-voip] Expressways and second call back???

[Matthew Loraditch]

EM is technically not supported so I’d want to know if that happens on a phone that is hardcoded with those dns and such.

Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
Network Engineer
Direct Voice: 443.541.1518

Facebook<https://www.facebook.com/heliontech?ref=hl> | Twitter<https://twitter.com/HelionTech> | LinkedIn<https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> | G+<https://plus.google.com/+Heliontechnologies/posts>

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Monday, August 8, 2016 11:57 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Expressways and second call back???

so we are just starting our pilot / testing of Expressways.

we have a 8861 phone.  It authenticates to Expressways.  we then log into extension Mobility.  if we log in with a simple DN User it works fine.

if we log in with one of our profiles, that have Jabber, SNR, different device profiles, etc we end up with a second call, calling in just after the call connects or receiving a call just after it connects.  soon as we try to answer it, it goes away.  go back to the original call and it comes back and just keeps ringing.

Anyone seen anything like this? CM 10.5.  expressways 8.7

TIA

Scott

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160808/4f5bad27/attachment.html>