[cisco-voip] Softkeys missing on 796X on secondary line pickup

Erick Bergquist erickbee at gmail.com
Sat Aug 27 04:51:05 EDT 2016


We have been working on this same issue past week or so. We downgraded
firmware and it fixed it, since it appeared on a upgrade to 11.5 and phones
updated firmware. I was about to post this same question.

Thanks for the bug ID!

Erick


On Friday, August 26, 2016, Johnson, Ken <kenjohnson at letu.edu> wrote:

> Thank you Brian very much! Your bug search skills are indeed a hidden gem
> J
>
>
>
> *From:* bmeade90 at gmail.com
> <javascript:_e(%7B%7D,'cvml','bmeade90 at gmail.com');> [mailto:
> bmeade90 at gmail.com <javascript:_e(%7B%7D,'cvml','bmeade90 at gmail.com');>] *On
> Behalf Of *Brian Meade
> *Sent:* Thursday, August 25, 2016 10:28 AM
> *To:* Johnson, Ken <kenjohnson at letu.edu
> <javascript:_e(%7B%7D,'cvml','kenjohnson at letu.edu');>>
> *Cc:* cisco-voip at puck.nether.net
> <javascript:_e(%7B%7D,'cvml','cisco-voip at puck.nether.net');>
> *Subject:* Re: [cisco-voip] Softkeys missing on 796X on secondary line
> pickup
>
>
>
> Actually that was a duplicate bug.  Actual bug- https://bst.cloudapps.
> cisco.com/bugsearch/bug/CSCva72381
>
>
>
> This only applies to 9.4(2)SR2 firmware.
>
>
>
> On Thu, Aug 25, 2016 at 11:26 AM, Brian Meade <bmeade90 at vt.edu
> <javascript:_e(%7B%7D,'cvml','bmeade90 at vt.edu');>> wrote:
>
> It looks like you're hitting this bug which hasn't been fixed yet-
> https://bst.cloudapps.cisco.com/bugsearch/bug/CSCva74777
>
>
>
> Looks like you can do a firmware downgrade or turn off "Always Use Prime
> Line"
>
>
>
> On Thu, Aug 25, 2016 at 10:20 AM, Johnson, Ken <kenjohnson at letu.edu
> <javascript:_e(%7B%7D,'cvml','kenjohnson at letu.edu');>> wrote:
>
> We recently began tracking a reported issue where folks with multiple
> lines on their phones were finding they were missing all softkeys on their
> phone under the following scenario:
>
> ·         Incoming call comes in on other than the primary line
>
> ·         User picks up handset (or activates speakerphone).
>
> ·         User gets dialtone from their primary line at this point
>
> ·         User presses line key for secondary line which is ringing
>
> ·         User is connected successfully to second line but has no
> softkeys
>
>
>
> If the user in the situation above presses the ringing line key before
> picking up the handset or activating speakerphone, softkeys work fine.  So
> far we can only replicate this on 796X phones – our 88XX phones do not do
> this.
>
>
>
> We are on CUCM 10.5.2 and the only recent changes were a July update to
> Device Pack 10.5(2.14076) and firmware 9.4(2)SR2
>
>
>
> Has anyone else run into this – we’re trying to figure out if this is a
> bug (it seems like it) or the result of some incorrect line pick-up config
> or similar on our side. We’re also checking with TAC of course but just
> wondering if the hidden cause on this is simpler than we’re making it out
> to be…
>
>
>
> Ken Johnson
> Director for Network and Telecommunication Services
> Information Technology
> www.letu.edu/it |  twitter.com/letuit
>   [image: cid:image001.gif at 01CF741A.2769F1A0]
>
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160827/b97e1ab2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 6544 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160827/b97e1ab2/attachment.gif>


More information about the cisco-voip mailing list