[cisco-voip] Jabber "Call" options

[Brian Meade]

Are you using UDS for directory or BDI/EDI?

On Thu, Dec 22, 2016 at 4:18 PM, Ben Amick <bamick at humanarc.com> wrote:

> So for some reason I never remember this being an issue in the past for
> other organizations, but my current organization is showing some weird
> activity with the “call” button in jabber. So the number on the main page
> of the AD user is showing for their “Work” number, and their “Mobile” shows
> up, but “Fax” does not (which makes sense) but the issue I’m having is that
> “IP Phone” is not showing up as an option. Now, normally we have IP Phone
> and Main as the same number, but some people have their DID set as their
> main number. Is there any way we can make Jabber show both?
>
>
>
> *Ben Amick*
>
> Telecom Analyst
>
>
>
> Confidentiality Note: This message is intended for use only by the
> individual or entity to which it is addressed and may contain information
> that is privileged, confidential, and exempt from disclosure under
> applicable law. If the reader of this message is not the intended recipient
> or the employee or agent responsible for delivering the message to the
> intended recipient, you are hereby notified that any dissemination,
> distribution or copying of this communication is strictly prohibited. If
> you have received this communication in error, please contact the sender
> immediately and destroy the material in its entirety, whether electronic or
> hard copy. Thank you
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20161222/27a3f433/attachment.html>