[cisco-voip] CAD Timers for breaks

[Ben Amick]

So I received a request from some of my supervisors - they're irritated that they constantly have to police users when they go over on time for breaks, lunches, etc. I'm looking for a way to have it so that after 15 minutes, CAD will alert either the user or the supervisor that X should be back from break, but they aren't, so on and so forth, or even just shove them back into ready status after a timer expires (like the work timer, but for a not-ready status). I tried creating this, but the only method I could find was the a command that while accomplished the goal, it also seems to accomplish the function of "lock CAD up for the entire duration and make it able to do absolutely nothing"

Anyone have any ideas?

Ben Amick
Telecom Analyst



Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20161227/6e944607/attachment.html>