[cisco-voip] Sip to PRI

[Brian Meade]

Is the PRI in Multiple_Frame_Established for Layer 2?  Do you get any
output for "debug isdn q931"?

On Tue, Feb 2, 2016 at 3:23 PM, David Jengan <davidjengan at gmail.com> wrote:

> Hi,
> Trying to get the call out via pri, while speaking sip to the cube, can't
> route out. At bare min, isn't that I need inbound voip dialpeer, and
> outbound pots dial-peer with pri in there.
> I do match correct dial peers,  yet facing this issue. Any thoughts on
> what this might be caused by.
>
> Thanks
> D
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160202/9557d240/attachment.html>