[cisco-voip] Sip to PRI

[David Jengan]

My bad, I wasn't sending the right digits to the carrier. All good now.

Brian, yes those items were all fine.

Best,
David
On Feb 2, 2016 3:40 PM, "Brian Meade" <bmeade90 at vt.edu> wrote:

> Is the PRI in Multiple_Frame_Established for Layer 2?  Do you get any
> output for "debug isdn q931"?
>
> On Tue, Feb 2, 2016 at 3:23 PM, David Jengan <davidjengan at gmail.com>
> wrote:
>
>> Hi,
>> Trying to get the call out via pri, while speaking sip to the cube, can't
>> route out. At bare min, isn't that I need inbound voip dialpeer, and
>> outbound pots dial-peer with pri in there.
>> I do match correct dial peers,  yet facing this issue. Any thoughts on
>> what this might be caused by.
>>
>> Thanks
>> D
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160202/8f6f70ce/attachment.html>