[cisco-voip] Caller ID issue

[David Zhars]

Sorry, just noticed in that example they reference ISDN.  Again, calls
coming in on ISDN are fine, we get name and number.
It's when calls come in on the POTS lines that we just get the phone number.

On Wed, Feb 3, 2016 at 12:27 PM, David Zhars <dzhars at gmail.com> wrote:

> ISDN works fine.  It's when the calls come in on the POTS line.
>
> I did find this by googling:
>
> interface serialx/x/x:23
> isdn supp-service name calling
>
> I am not sure about the :23 after the serial port designation...
>
>
> On Wed, Feb 3, 2016 at 12:23 PM, Brian Meade <bmeade90 at vt.edu> wrote:
>
>> Does the carrier send the caller name in the ISDN Setup message or in a
>> separate Facility message?  Can you show "debug isdn q931" for one of these
>> inbound calls?
>>
>> On Wed, Feb 3, 2016 at 12:13 PM, David Zhars <dzhars at gmail.com> wrote:
>>
>>> Cisco UCM 8.0 with 2801 in MGCP mode.
>>> Telco is sending Name and Number to us.
>>> Phones only ever display Number.
>>>
>>> In UCM, selected phones have both Caller Name and Caller Number ticked.
>>>
>>> Anything else could be preventing us from getting Names?
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160203/3578dd08/attachment.html>