[cisco-voip] Caller ID issue

[Brian Meade]

What CUCM/IOS version?  Do you have "Enable Caller ID" checked on the MGCP
FXO device?  You should have "caller-id enable" under the voice-port on the
router.

http://www.gossamer-threads.com/lists/cisco/voip/131620

On Wed, Feb 3, 2016 at 12:28 PM, David Zhars <dzhars at gmail.com> wrote:

> Sorry, just noticed in that example they reference ISDN.  Again, calls
> coming in on ISDN are fine, we get name and number.
> It's when calls come in on the POTS lines that we just get the phone
> number.
>
> On Wed, Feb 3, 2016 at 12:27 PM, David Zhars <dzhars at gmail.com> wrote:
>
>> ISDN works fine.  It's when the calls come in on the POTS line.
>>
>> I did find this by googling:
>>
>> interface serialx/x/x:23
>> isdn supp-service name calling
>>
>> I am not sure about the :23 after the serial port designation...
>>
>>
>> On Wed, Feb 3, 2016 at 12:23 PM, Brian Meade <bmeade90 at vt.edu> wrote:
>>
>>> Does the carrier send the caller name in the ISDN Setup message or in a
>>> separate Facility message?  Can you show "debug isdn q931" for one of these
>>> inbound calls?
>>>
>>> On Wed, Feb 3, 2016 at 12:13 PM, David Zhars <dzhars at gmail.com> wrote:
>>>
>>>> Cisco UCM 8.0 with 2801 in MGCP mode.
>>>> Telco is sending Name and Number to us.
>>>> Phones only ever display Number.
>>>>
>>>> In UCM, selected phones have both Caller Name and Caller Number ticked.
>>>>
>>>> Anything else could be preventing us from getting Names?
>>>>
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160203/42908229/attachment.html>