[cisco-voip] Slip sec on PRI

[Brian Meade]

You can monitor these values via SNMP with whatever network monitoring
application you're using.

On Thu, Feb 11, 2016 at 8:40 PM, Scott Voll <svoll.voip at gmail.com> wrote:

> OK, had an issues where I forgot to set the clock on some PRI's and had
> slip sec, unavailable sec, etc.  Is there any logging that I can use to see
> this in the future?  We use syslogs but nothing came in by default.  is
> there a way to set that up?  or a trigger in RTMT?  Something else I can do
> to be proactive?  We don't add PRI's very often so I don't expect it to
> happen for a while, but I would like to put something in place just in case
> for next time.
>
> TIA
>
> Scott
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160212/5a20715b/attachment.html>