[cisco-voip] Does Cisco Jabber (windrows) Conflict with MS Lync

[Anthony Holloway]

Your JID is made up from whatever is configured in IM&P under Presence >
Settings > Advanced Configuration > IM address scheme

You can see what everyone is already provisioned for in IM&P under System >
Presence Topology > All Assigned Users, and then look at the column labeled
IM Address.

I don't know anything about Office 365 and Presence integrations, sorry.

I don't for certain about default destinations in the Jabber client, but I
can tell you that if you hover over the contact, to get the contact card to
show, you can one click call them.  It looks like in my environment it's
choosing the Directory URI over the DN.  This wouldn't be the first time
Directory URI takes precedence over DN.  It does that in Phone Only Mode,
and shows up under your name at the top, where it would normally show your
status.



Multiple Ways to Call (Directory URI and DN)

[image: Inline image 2]



Contact Card One Click Default Call Option (Directory URI) *Note there is a
left and right section of this green call button.  The left side is the one
click, while the right side is a selection.

[image: Inline image 3]




On Mon, Feb 15, 2016 at 9:17 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> Thanks for this.
>
> I've decided to use a different domain for the  services discovery for the
> time being, eg myphone.acme.ca because I may not be able to prevent WebEx
> registration.
>
> SMTP userIDs in my AD are userid at acme.ca
>
> I don't believe I have a proxyAddress configured. Or if I actually need
> one. We'll be moving to Office365 over the summer.
>
> Should I be worrying about this?
>
> What would my JID be in this case?
>
> userID at myphone.acme.ca -or- userID at acme.ca   ?
>
> Does this have anything to do with the fact that whenever I want to dial
> someone from my contacts I have to select from a list? I'd like to be able
> to just dial from contacts. A default destination for example.
>
>
>
> Sent from my iPhone
>
> On Feb 15, 2016, at 3:47 PM, Anthony Holloway <
> avholloway+cisco-voip at gmail.com> wrote:
>
> Great tip Benjamin!
>
> Along the sames lines, if you *do* want Jabber to take over the Office
> integration, you will need to add to the AD attribute proxyAddresses, the
> following format: SIP:JID
>
> E.g., if my JID was aholloway at company.com, then my entry would be
> SIP:aholloway at company.com
>
> You may even end up with two or more proxyAddresses, depending on what
> else you are doing in AD.  I.e., SMTP:aholloway at company.com  The good
> news is, this is a list of addresses, and you can have multiple entries.
>
> There's actually a tool in the Jabber Admin ZIP file to help you bulk
> update your AD users to include this SIP proxyAddresses value.  You run it
> from a domain controller, and it's a GUI wizard that will generate an
> import file, and then import the file back in.  It defaults to
> SIP:smtpaddress, so if you JID != SMTPAddress, then you'll need to modify
> the import file, and manually import it another way.  The LDIF file
> format is standard
> <https://msdn.microsoft.com/en-us/library/bb727091.aspx#ECAA>.
>
> On Mon, Feb 15, 2016 at 1:57 PM, Benjamin Kenneally <benjamin at kenneally.me
> > wrote:
>
>> Lync and Jabber share a large number of resources and registry settings.
>> If you want Lync to maintain control of all the MS Office integration
>> (you're running Jabber phone only, as an example), install Jabber with the
>> flags
>>
>> msiexec.exe CLEAR=1 /i CIscoJabberSetup.msi CLICK2X=DISABLE
>>
>> and you should be set. This causes it to install without overwriting any
>> of those registry settings, including click to call.
>>
>> Best regards,
>>
>> Benjamin Kenneally
>>
>> On Mon, Feb 15, 2016 at 1:40 PM Nazar Shabour <nizarshabour at gmail.com>
>> wrote:
>>
>>> Dears,
>>>
>>> I found that when  Ms Lync  is working fine with outlook and reflecting
>>> all the IM status OK and then you install Jabber ,the sync is disturbed ,Is
>>> that due to the fact that Jabber overwrites the linkage to MS office and
>>> conflicts with Lync? any such experiences /opinions.
>>>
>>> Best Regards
>>>
>>>
>>> AbuALneez
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160216/eea57076/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 41871 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160216/eea57076/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 26468 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160216/eea57076/attachment-0001.png>