[cisco-voip] R: Common Partition Space Issue - Upgrade CUCM from 9.6 to 11.x

Alessandro Bertacco bertacco.alessandro at alice.it
Sun Jan 17 04:57:41 EST 2016


Ok, Tim, thank you very much.

I’ll try using Watermark modification.

Regards

 

Alessandro

 

Da: Tim Frazee [mailto:tfrazee at gmail.com] 
Inviato: mercoledì 13 gennaio 2016 17:15
A: Alessandro Bertacco <bertacco.alessandro at alice.it>
Cc: cisco-voip at puck.nether.net
Oggetto: Re: [cisco-voip] Common Partition Space Issue - Upgrade CUCM from 9.6 to 11.x

 

the 13 node cluster upgrade from 9x to 10x that I performed would disagree. But ok.

 

On Tue, Jan 12, 2016 at 1:32 AM, Alessandro Bertacco <bertacco.alessandro at alice.it <mailto:bertacco.alessandro at alice.it> > wrote:

Hi Tim, this is a Major Upgrade, the ISO image is about 5GB, and so, changing only the watermark of the logging partition is not enough for a vDisk of 80GB.

 

 

 

Da: Tim Frazee [mailto:tfrazee at gmail.com <mailto:tfrazee at gmail.com> ] 
Inviato: lunedì 11 gennaio 2016 17:30
A: Alessandro Bertacco <bertacco.alessandro at alice.it <mailto:bertacco.alessandro at alice.it> >
Cc: cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net> 
Oggetto: Re: [cisco-voip] Common Partition Space Issue - Upgrade CUCM from 9.6 to 11.x

 

what size image are you using? Depending on which, the reallocation cop file might not gain you much usable space.

instead of the free_common_space cop file, I crank the low and high water mark for the logging partition and give it a while to clean up. it's one less cop file to install and solves the problem. we've done it on everything from a small, 2.5k image to a 10k image. works everytime.

 

On Mon, Jan 11, 2016 at 4:24 AM, Alessandro Bertacco <bertacco.alessandro at alice.it <mailto:bertacco.alessandro at alice.it> > wrote:

 

Hi Guys,

   I’m planning to upgrade our CUCM cluster from version 9.6 to version 11.00, and I’ve some questions for you.

 

Version 9.x has the bug of the limited Common Partition Space, so Upgrade fails.

 

I’ve read Upgrade document downloaded from Cisco Site, and I’ve noticed that Cisco recommend to use two different Cop files to solve the Common Partition Space requirements issue.

 

First: ciscocm.free_common_space_v1.3.k3.cop.sgn, to delete the ISO inactive image on the Common partition

 

Second: ciscocm.vmware-disk-size-reallocation-1.0.cop.sgn, to expand and relocate the Common Partition Space on the Virtual Disk.

 

The question is, anyone as already done one or all the procedure listed above?

 

Some recommendations?

 

Thank you very much and have a nice day.

 

Alessandro Bertacco

Network & Voice Engineer

Lan Service S.r.l.

 

 

 

 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net> 
https://puck.nether.net/mailman/listinfo/cisco-voip

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160117/8279a232/attachment.html>


More information about the cisco-voip mailing list