[cisco-voip] cisco cucm 11 unable to login cli

[Ryan Huff]

Hey Claiton,


It might be possible to rebuild cliCommands.xml file (if the is the actual issue) via the rescue disk.  I'd open up a TAC case and have them take a look before rebuilding.


My guess though, is that the node is toast. Is this on the back of an upgrade or a new install?


Thanks,


= Ryan =



Email: ryanthomashuff at outlook.com

Spark: ryanthomashuff at outlook.com

Twitter: @ryanthomashuff<http://twitter.com/ryanthomashuff>

LinkedIn: ryanthomashuff<http://linkedin.com/in/ryanthomashuff>

Web ryanthomashuff.com<http://ryanthomashuff.com>


________________________________
From: cisco-voip <cisco-voip-bounces at puck.nether.net> on behalf of Claiton Campos <claitoncampos at gmail.com>
Sent: Friday, January 29, 2016 12:10 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] cisco cucm 11 unable to login cli

I'm in trouble when I try to log into the CUCM via CLI and the following message appears and then the connection is terminated
Command Line Interface is starting up, please wait ...
[Fatal Error] :-1:-1: Premature end of file.
cannot find any commands in /usr/local/platform/conf/cliCommands.xml Cannot start
Has anyone had a similar problem with that?
The CUCM this in version 11.0.1.

Regards.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160129/db134343/attachment.html>