[cisco-voip] Modify calling number in SIP invite on CUCM 11

[Florian Kroessbacher]

Maybe your trunk to the Recorder is set to Offnet, try to set it Onnet


Am 1. Juli 2016, 15:47 +0200 schrieb Deepak Maggo<dmaggo at ipcelerate.com>:
> Hi,
> 
> 
> The problem I have is that we have active recording system which communicates with the CUCM cluster using a SIP trunk and uses Built-in-bridge configuration.
> 
> 
> The invites that CUCM sends via the SIP trunk show the "External Phone Number Mask" rather than the four digit extension when make PSTN calls which will not work according tothe recording system. We need the External Phone Number Mask on phones to display the correct Caller ID.
> 
> 
> Can anyone suggest a way to fix this?
> 
> 
> 
> Ideally I need a way to modify the number in the SIP invite but I cannot find any example of how to do this.
> 
> 
> Any suggestions are welcome.
> 
> 
> Thanks
> 
> Thanks&Regards,
> Deepak Maggo
> 
> 
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160701/c055d0ab/attachment.html>