[cisco-voip] Modify calling number in SIP invite on CUCM 11

[Deepak Maggo]

Florian,

Thanks for the response. My route pattern is set to OnNet only:

[image: Inline image 1]

*Thanks & Regards,*
*Deepak Maggo*

On Fri, Jul 1, 2016 at 10:50 AM, Florian Kroessbacher <
florian.kroessbacher at gmail.com> wrote:

> Maybe your trunk to the Recorder is set to Offnet, try to set it Onnet
>
>
> Am 1. Juli 2016, 15:47 +0200 schrieb Deepak Maggo <dmaggo at ipcelerate.com>:
>
> Hi,
>
> The problem I have is that we have active recording system which
> communicates with the CUCM cluster using a SIP trunk and uses
> Built-in-bridge configuration.
>
> The invites that CUCM sends via the SIP trunk show the "External Phone
> Number Mask" rather than the four digit extension when make PSTN calls
> which will not work according to  the recording system. We need the
> External Phone Number Mask on phones to display the correct Caller ID.
>
> Can anyone suggest a way to fix this?
>
> Ideally I need a way to modify the number in the SIP invite but I cannot
> find any example of how to do this.
>
> Any suggestions are welcome.
>
> Thanks
> *Thanks & Regards,*
> *Deepak Maggo*
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160701/24305141/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 248806 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160701/24305141/attachment.png>