[cisco-voip] DS3 voice delivery?

Rob Dawson rdawson at force3.com
Wed Jun 8 15:39:59 EDT 2016


You can still attach service to an AS5400 through January, 2016. Pick up a reman and load it with 5 years of smartnet. We never had issues with our 5300s, rock solid.

Sent from my iPhone

> On Jun 8, 2016, at 1:29 PM, Doug McIntyre <merlyn at geeks.org> wrote:
> 
> No, the NM-1T3/E3 is a data only part, packet over T3. 
> 
> Cisco did used to have a product, the VGD-1T3 that did just that,
> which looked like it was mostly a rebranded AS5200 with the T3 interface
> and pushed to voice instead of modems. But it is discontinued, probably
> because they only sold a handful. 
> 
> The M13 MUX to VWIC card solution is probably the best solution still.
> 
> 
>> On Wed, Jun 08, 2016 at 12:45:09PM -0400, Lelio Fulgenzi wrote:
>> There's this... 
>> 
>> http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/2600-3600-3700-series-t3-e3-network-module/product_data_sheet09186a008010fba2.html 
>> 
>> But in CUCM v9.1, I don't see it as a pull down option in a 3900 series gateway configuration. 
>> 
>> So, not sure it's supported for voice. 
>> 
>> --- 
>> Lelio Fulgenzi, B.A. 
>> Senior Analyst, Network Infrastructure 
>> Computing and Communications Services (CCS) 
>> University of Guelph 
>> 
>> 519‐824‐4120 Ext 56354 
>> lelio at uoguelph.ca 
>> www.uoguelph.ca/ccs 
>> Room 037, Animal Science and Nutrition Building 
>> Guelph, Ontario, N1G 2W1 
>> 
>> ----- Original Message -----
>> 
>> From: "Nick Barnett" <nicksbarnett at gmail.com> 
>> To: "Cisco VoIP Group" <cisco-voip at puck.nether.net> 
>> Sent: Wednesday, June 8, 2016 9:51:15 AM 
>> Subject: [cisco-voip] DS3 voice delivery? 
>> 
>> So, we have an old MUX that died. We have to either replace the MUX or use something else. Is it possible to use a DS3 SM on an ISR to terminate the DS3? Right now, we have a DS3 that hits a mux and breaks out to 28 PRIs... those PRIs go into a plethora of VWIC interfaces on a SIP router. Would it be possible to get another module for this router that lets us plug the coax in and skip all of this VWIC/MUX business? 
>> 
>> Thanks, 
>> Nick 
>> 
>> _______________________________________________ 
>> cisco-voip mailing list 
>> cisco-voip at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2368 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160608/c212821e/attachment.p7s>


More information about the cisco-voip mailing list