[cisco-voip] Level 3 Sip and CUBE

[Ryan Huff]

Matthew,

The biggest things you'll find in comparison to the document I think you might be looking at are;

- no more registrar
- they do g711 and g729 natively

However, the sendonly still needs to be sendrecv in the sip header

Also, if you have any analog faxing they do t38. I would also use the following in your dial peers:

- fax-relay ecm disable
- fax-rate 14400
- fax protocol pass-through g711ulaw

Thanks,

Ryan

On Jun 13, 2016, at 10:00 AM, Matthew Loraditch <MLoraditch at heliontechnologies.com<mailto:MLoraditch at heliontechnologies.com>> wrote:

Is anyone using them? We are doing our first turn up with them and the only Cisco configuration documentation they could provide was 5 years old and they told us  it was not accurate...
If you are and could provide a scrubbed config, we would very much appreciate it.

Matthew G. Loraditch - CCNP-Voice, CCNA-R&S, CCDA
Network Engineer
Direct Voice: 443.541.1518

Facebook<https://www.facebook.com/heliontech?ref=hl> | Twitter<https://twitter.com/HelionTech> | LinkedIn<https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> | G+<https://plus.google.com/+Heliontechnologies/posts>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160613/2a1a588c/attachment.html>