[cisco-voip] Max length for analogue

[Louis Koekemoer (ZA)]

I need this for the mining industry. They currently have a old Nortel and claim it does about 24km. I now need to try and match that on Cisco.



Sent from my Samsung device


-------- Original message --------
From: Brian Meade <bmeade90 at vt.edu>
Date: 22/06/2016 21:55 (GMT+02:00)
To: "Louis Koekemoer (ZA)" <Louis.Koekemoer at dimensiondata.com>
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Max length for analogue



It's different per device.  FXS port is different than ATA186 which is different than VG224.  Do you already have an FXS port or ATA you're planning to use?

Here's calculations for the ATA186- https://communities.cisco.com/docs/DOC-10122<https://communities.cisco.com/docs/DOC-10122>

On Wed, Jun 22, 2016 at 3:50 PM, Louis Koekemoer (ZA) <Louis.Koekemoer at dimensiondata.com<mailto:Louis.Koekemoer at dimensiondata.com>> wrote:


Hi all,

What would be the maximum length one will be able to run an analogue extension or what device can one use to extend the length?

Regards

Louis



Sent from my Samsung device


This email and all contents are subject to the following disclaimer:
"http://www.dimensiondata.com/emaildisclaimer"<http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip<https://puck.nether.net/mailman/listinfo/cisco-voip>




itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160622/77add91f/attachment.html>