[cisco-voip] Max length for analogue

[Brian Meade]

What type of cabling is it?  Really comes down to the loop resistance.

On Wed, Jun 22, 2016 at 4:22 PM, Louis Koekemoer (ZA) <
Louis.Koekemoer at dimensiondata.com> wrote:

> I need this for the mining industry. They currently have a old Nortel and
> claim it does about 24km. I now need to try and match that on Cisco.
>
>
>
> Sent from my Samsung device
>
>
> -------- Original message --------
> From: Brian Meade <bmeade90 at vt.edu>
> Date: 22/06/2016 21:55 (GMT+02:00)
> To: "Louis Koekemoer (ZA)" <Louis.Koekemoer at dimensiondata.com>
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Max length for analogue
>
>
>
> It's different per device.  FXS port is different than ATA186 which is
> different than VG224.  Do you already have an FXS port or ATA you're
> planning to use?
>
> Here's calculations for the ATA186-
> https://communities.cisco.com/docs/DOC-10122
>
> On Wed, Jun 22, 2016 at 3:50 PM, Louis Koekemoer (ZA) <
> Louis.Koekemoer at dimensiondata.com> wrote:
>
>>
>>
>> Hi all,
>>
>> What would be the maximum length one will be able to run an analogue
>> extension or what device can one use to extend the length?
>>
>> Regards
>>
>> Louis
>>
>>
>>
>> Sent from my Samsung device
>>
>>
>> This email and all contents are subject to the following disclaimer:
>> "http://www.dimensiondata.com/emaildisclaimer"
>> <http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>
> itevomcid
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160622/74d3fa87/attachment.html>