[cisco-voip] Standalone CUIC in UCCX 11

[James Buchanan]

Hello again,

How do the stock reports get into the standalone CUIC from the on-prem
CUIC? I have this integration done, but the reports are not there.

Thanks,

James

On Wed, Mar 2, 2016 at 11:00 AM, Brian Meade <bmeade90 at vt.edu> wrote:

> Yep, all of the stock reports should be there as well.
>
> On Wed, Mar 2, 2016 at 10:58 AM, James Buchanan <james.buchanan2 at gmail.com
> > wrote:
>
>> Thanks for the info. Can you run the UCCX stock reports from the
>> standalone CUIC also? That'd be great. Then, you could run SocialMiner and
>> all UCCX reports from the same interface.
>>
>> On Wed, Mar 2, 2016 at 10:55 AM, Brian Meade <bmeade90 at vt.edu> wrote:
>>
>>> CUIC always pulls from UCCX.  Having a standalone CUIC allows you to
>>> make custom reports and run them directly on the same server.  Right now,
>>> you have to use a standalone CUIC to build custom reports and then import
>>> those to UCCX co-res CUIC to run them.
>>>
>>> On Wed, Mar 2, 2016 at 10:42 AM, James Buchanan <
>>> james.buchanan2 at gmail.com> wrote:
>>>
>>>> Hello,
>>>>
>>>> What purpose does the standalone CUIC configuration serve in UCCX 11.0?
>>>> Does it send data to CUIC? Does it pull data from CUIC? Does it allow you
>>>> to use the standalone CUIC to run the same UCCX reports you run from the
>>>> on-prem CUIC? I have looked and looked to see why you would even configure
>>>> this integration, and have found nothing.
>>>>
>>>> Thanks,
>>>>
>>>> James
>>>>
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160302/b37e0468/attachment.html>