[cisco-voip] DTMF digits not hitting Voice Gateway

[Aaron Banks]

Yes, G.711 and both software and hardware resources.

From: ryanhuff at outlook.com
To: amichaelbanks at hotmail.com
CC: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] DTMF digits not hitting Voice Gateway
Date: Wed, 2 Mar 2016 23:25:02 +0000






Do these phones have access to MTP resources and if so, software resources or hardware resources?



Also, I assume this is G.711, correct?




Thanks,



Ryan


On Mar 2, 2016, at 4:40 PM, Aaron Banks <amichaelbanks at hotmail.com> wrote:










This problem has been resolved but I thought I'd put it out to the group for feedback, suggestions or general discussion.



One the odd occasion, this customer (who has 8861,8841,7821 SIP phones) calls a business with an IVR and the DTMF digits don't work.  It's odd (and infrequent).  The caller waits after pressing a digit and eventually the call drops.



My solution is to reset the SIP trunk between CUCM (v10.5.2) and CUBE.  In all instances, the issue is resolved.  On the other side of the CUBE is service provider SIP trunks.



My question to the group is do any of you have the same issue with SIP phones?  If so, what do you do?



Aaron





_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net

https://puck.nether.net/mailman/listinfo/cisco-voip


 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160302/c1a95d9b/attachment.html>