[cisco-voip] IM&P - services reported in unknown state after SAN cert install

[Ryan Huff]

Did you also install the root CA and all/any intermediaries leading up to the identity certificate on all nodes? As a matter of practice, I always start with the root and build my way out to the identity, on each node.

Thanks,

Ryan

Sent from my iPhone

On Mar 14, 2016, at 2:54 PM, Anthony Holloway <avholloway+cisco-voip at gmail.com<mailto:avholloway+cisco-voip at gmail.com>> wrote:

Just to clarify, your Multi-Server SAN cert should be installed to Tomcat and not Tomcat Trust.  The signing CA cert should go in Tomcat Trust.  Is that what you meant to say you did?

On Mon, Mar 14, 2016 at 1:47 PM, Erick Wellnitz <ewellnitzvoip at gmail.com<mailto:ewellnitzvoip at gmail.com>> wrote:
I have a strange issue with CUCM 11.0.1 and IM&P 11.0.1

We installed the multi-server SAN cert for tomcat and now the IM&P data monitor service is in an unknown state according to the system troubleshooter.

The SAN cert is installed to tomcat-trust so it shouldn't be a cert issue.  Done service restarts, reboots and nothing seems to resolve this.

Anyone seen something like this before?

Thanks in advance!

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160314/51da1218/attachment.html>