[cisco-voip] Query or report to find devices that have video calling enabled?

[Brian Meade]

That's stored in the devicexml16k , devicexml8k, and devicexml4k tables.

Only non-default values are stored there.  It's in XML so can't make a
query to check for a certain item.  You have to use some post-processing to
pull out the values you care about.

On Mon, Nov 28, 2016 at 1:04 PM, Nick Barnett <nicksbarnett at gmail.com>
wrote:

> Hello. We are a Cisco phone shop, but use Lync/Skype for IM&P. We also use
> cucilync. In order to reduce confusion with end users, we've elected to
> disable video calling from CSF devices and let them do video calls inside
> Lync/Skype.
>
> I batched in a change to all CSF devices to disable video calling. The
> batch job reports as successful with no errors. Every now and then I come
> across a CSF device that still has video calling enabled.
>
> I was poking around in the informix trying to find a query to run that
> will list all CSF devices that still have video calling enabled, but I'm
> striking out. It seems that this information is not housed in the "device"
> table. I also went through the data dictionary to no avail.
>
> Maybe there is an easier way to do this, but I just need a report, or
> query that will show these improperly configured devices. Does anyone know
> where the "Product Specific Configuration Layout" at the bottom of the
> CSF device config is actually housed and how it is related to the actual
> CSF device?
>
> Thanks,
> Nick
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20161128/f48749ab/attachment.html>