[cisco-voip] Cisco ATA 186

[Asim Mekki Basheer]

Yes allowed since the IP PHONES connected to the same port.



Regards


ASIM MEKKI



________________________________
From: Lisa Notarianni <lisa.notarianni at scranton.edu>
Sent: Wednesday, October 5, 2016 6:23 AM
To: Asim Mekki Basheer
Subject: RE: [cisco-voip] Cisco ATA 186


Are you sure the IP and port are configured to allow the device to work in the voice VLAN?



[Lisa Notarianni White Logo Business Card]



From: Asim Mekki Basheer [mailto:asim_323 at hotmail.com]
Sent: Wednesday, October 05, 2016 9:23 AM
To: Lisa Notarianni <lisa.notarianni at scranton.edu>; Ashwani Ranpise <ashwani at ranpise.com>; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cisco ATA 186





Yes its ATA 186

________________________________

From: Lisa Notarianni <lisa.notarianni at scranton.edu<mailto:lisa.notarianni at scranton.edu>>
Sent: Wednesday, October 5, 2016 6:15 AM
To: Asim Mekki Basheer; Ashwani Ranpise; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: RE: [cisco-voip] Cisco ATA 186



I have had this issue but the network configuration did not allow it to register or the device type is different than what you are actually trying to configure.  It is a ATA 186 correct?



[Lisa Notarianni White Logo Business Card]



From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Asim Mekki Basheer
Sent: Wednesday, October 05, 2016 9:13 AM
To: Ashwani Ranpise <ashwani at ranpise.com<mailto:ashwani at ranpise.com>>; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Cisco ATA 186





please see the attached still showed rejected even after assigned The DN



Thanks



ASIM

________________________________

From: Ashwani Ranpise <ashwani at ranpise.com<mailto:ashwani at ranpise.com>>
Sent: Wednesday, October 5, 2016 5:55 AM
To: Asim Mekki Basheer
Subject: Re: [cisco-voip] Cisco ATA 186



Asim,

I dont see any DN has been assigned.  Assign the DN to your ATA-186 device and it will work.

Thanks,

Ashwani



On Wed, Oct 5, 2016 at 8:50 AM, Asim Mekki Basheer <asim_323 at hotmail.com<mailto:asim_323 at hotmail.com>> wrote:

Hello Everyone



we have CCM 7.5 ,recently we faced issue with fax the ATA showed rejected in the call manager we make factory reset the same  issue



Regards





_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20161005/10aff5a2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 22489 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20161005/10aff5a2/attachment.png>