[cisco-voip] Cisco ATA 186

[Carlo Calabrese]

Have you tried changing the mac address on CUCM and let the ATA auto register? do both MAC address  

    On Wednesday, October 5, 2016 8:42 AM, Asim Mekki Basheer <asim_323 at hotmail.com> wrote:
 

  <!--#yiv9172273343 P {margin-top:0;margin-bottom:0;}-->Yes allowed since the IP PHONES connected to the same port.

Regards
ASIM MEKKI



From: Lisa Notarianni <lisa.notarianni at scranton.edu>
Sent: Wednesday, October 5, 2016 6:23 AM
To: Asim Mekki Basheer
Subject: RE: [cisco-voip] Cisco ATA 186 Are you sure the IP and port are configured to allow the device to work in the voice VLAN?  From: Asim Mekki Basheer [mailto:asim_323 at hotmail.com]
Sent: Wednesday, October 05, 2016 9:23 AM
To: Lisa Notarianni <lisa.notarianni at scranton.edu>; Ashwani Ranpise <ashwani at ranpise.com>; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cisco ATA 186  Yes its ATA 186 From: Lisa Notarianni <lisa.notarianni at scranton.edu>
Sent: Wednesday, October 5, 2016 6:15 AM
To: Asim Mekki Basheer; Ashwani Ranpise; mailto:cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Cisco ATA 186 I have had this issue but the network configuration did not allow it to register or the device type is different than what you are actually trying to configure.  It is a ATA 186 correct?  From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Asim Mekki Basheer
Sent: Wednesday, October 05, 2016 9:13 AM
To: Ashwani Ranpise <ashwani at ranpise.com>;mailto:cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cisco ATA 186  please see the attached still showed rejected even after assigned The DN Thanks ASIMFrom: Ashwani Ranpise <ashwani at ranpise.com>
Sent: Wednesday, October 5, 2016 5:55 AM
To: Asim Mekki Basheer
Subject: Re: [cisco-voip] Cisco ATA 186 Asim,I dont see any DN has been assigned.  Assign the DN to your ATA-186 device and it will work.Thanks,Ashwani On Wed, Oct 5, 2016 at 8:50 AM, Asim Mekki Basheer <asim_323 at hotmail.com> wrote:
Hello Everyone we have CCM 7.5 ,recently we faced issue with fax the ATA showed rejected in the call manager we make factory reset the same  issue Regards  
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20161005/ea0aad0c/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 22489 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20161005/ea0aad0c/attachment.png>