[cisco-voip] WS-6608-E1 with SUP-720

[Ahmed Elnagar]

Just to update, I confirmed this from Cisco also through and internal only document that it will not working.

Thanks all

Best Regards,
Ahmed Elnagar | CCIE#24697 Collaboration

From: Erick Wellnitz [mailto:ewellnitzvoip at gmail.com]
Sent: Tuesday, September 6, 2016 12:54 AM
To: Ahmed Elnagar <ahmed_elnagar at hotmail.com>
Cc: VOIP Group <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] WS-6608-E1 with SUP-720


No.  The 6608 series blades were never supported on IOS, only CAT OS

On Sep 4, 2016 9:36 AM, "Ahmed Elnagar" <ahmed_elnagar at hotmail.com<mailto:ahmed_elnagar at hotmail.com>> wrote:
Hello;

Anyone knows if I can run the above module “WS-6608-E1” with SUP-720…I cannot find any support information regarding this module.

Best Regards,
Ahmed Elnagar | CCIE#24697 Collaboration


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20161009/1518b195/attachment.html>