[cisco-voip] CUCM 9 to 11.5 BAT fields

[Dana Tong]

However, Export UDP All Details, and then re-insert All Details works

So… Insert device - Specific Details with the field header of “Forward all Voice Mail 1”    fails
And Insert device – All Details with the field header of “Forward all Voice Mail 1”    works fine.

This is annoying. But I can make it work.


From: cisco-voip <cisco-voip-bounces at puck.nether.net> on behalf of Dana Tong <dana.tong at yellit.com.au>
Date: Wednesday, 19 April 2017 at 2:26 pm
To: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Subject: [cisco-voip] CUCM 9 to 11.5 BAT fields


This sender failed our fraud detection checks and may not be who they appear to be. Learn about spoofing<http://aka.ms/LearnAboutSpoofing>

Feedback<http://aka.ms/SafetyTipsFeedback>

Hi all,

I have an annoying issue with BAT v11.5.

I have exported phones and UDP etc from CUCM version 9 to version 11.5.

BAT reports “FORWARD ALL VOICE MAIL” is not a supported field.

However, when I insert the devices (specific details) based on a template and then export all details on V11.5 those field headings are exactly the same (when comparing the version 9.1 export and the 11.5 export).

Has anyone encountered this issue and can suggest a fix? I’d like to re-insert the configuration with the correct values as there are many people who forward to other destinations (instead of voicemail).

Cheers
Dana



[cid:image001.png at 01D2B92A.32975830]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170419/16ab79a7/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 76638 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170419/16ab79a7/attachment.png>