[cisco-voip] Outbound Video Calls to Webex fail with 481

[Jonathan Charles]

The VCSC was set to 1.2, and the E was set to 1.0... changed them both 1.0,
but no change in behavior...

On Sun, Aug 20, 2017 at 5:30 PM, Jeffrey McHugh <jmchugh at fidelus.com> wrote:

> Is this new or recent upgrade to 8.10? I haven't seen it yet but
> expressway 8.10 defaults to tls 1.2 I think but webex requires tls v1
>
> Jeffrey McHugh | Sr. Collaboration Consulting Engineer
> Fidelus Technologies
> Named Best UC Provider in the USA
> +1-212-616-7801 office | www.fidelus.com
> Disclaimer - August 20, 2017
> This email and any files transmitted with it are confidential and intended
> solely for Jonathan Charles,cisco-voip at puck.nether.net. If you are not
> the named addressee you should not disseminate, distribute, copy or alter
> this email. Any views or opinions presented in this email are solely those
> of the author and might not represent those of Fidelus Technologies, LLC.
> Warning: Although Fidelus Technologies, LLC has taken reasonable
> precautions to ensure no viruses are present in this email, the company
> cannot accept responsibility for any loss or damage arising from the use of
> this email or attachments.
> Sent from my iPhone
>
> > On Aug 20, 2017, at 6:26 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> >
> > We have an SX80 connected to CUCM 11.5 and VCSC 8.10  to a VCSE 8.10...
> >
> > Outbound calls route to Webex, you see them enter the meeting and then
> after 4 seconds, they drop, the VCS E shows
> >
> > 481 Call/Transaction Does Not Exist
> >
> > Does anyone have any ideas?
> >
> >
> >
> >
> > Jonathan
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170820/382886c8/attachment.html>