[cisco-voip] Outbound Video Calls to Webex fail with 481

[Jeffrey McHugh]

Is this new or recent upgrade to 8.10? I haven't seen it yet but expressway 8.10 defaults to tls 1.2 I think but webex requires tls v1

Jeffrey McHugh | Sr. Collaboration Consulting Engineer
Fidelus Technologies
Named Best UC Provider in the USA
+1-212-616-7801 office | www.fidelus.com
Disclaimer - August 20, 2017
This email and any files transmitted with it are confidential and intended solely for Jonathan Charles,cisco-voip at puck.nether.net. If you are not the named addressee you should not disseminate, distribute, copy or alter this email. Any views or opinions presented in this email are solely those of the author and might not represent those of Fidelus Technologies, LLC. Warning: Although Fidelus Technologies, LLC has taken reasonable precautions to ensure no viruses are present in this email, the company cannot accept responsibility for any loss or damage arising from the use of this email or attachments.
Sent from my iPhone

> On Aug 20, 2017, at 6:26 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> We have an SX80 connected to CUCM 11.5 and VCSC 8.10  to a VCSE 8.10...
>
> Outbound calls route to Webex, you see them enter the meeting and then after 4 seconds, they drop, the VCS E shows
>
> 481 Call/Transaction Does Not Exist
>
> Does anyone have any ideas?
>
>
>
>
> Jonathan
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip