[cisco-voip] PLM 11.0 issues with CUC 11.5.1 SU3?

Erick Bergquist erickbee at gmail.com
Mon Aug 28 02:11:22 EDT 2017


FWIW,

This is the only paragraph in the CUC 11.5 SU3 release notes.
Encryption is disabled on CUC at moment.

In earlier releases, by default encryption was enabled on Cisco Unity
Connection. However, Unity Connection 11.5(1) SU3 and later allows you
to enable or disable the encryption on restricted version of Cisco
Unity Connection to use the security modules. In Demo Mode, the
encryption is disabled by default. It means you are not allowed to use
the security modules of Cisco Unity Connection in Demo Mode. You can
enable the encryption on Unity Connection only when $0 ENC SKU/license
file is installed on the PLM. To enable or disable the encryption, a
new CLI command utils
cuc encryption is introduced in Unity Connection 11.5(1) SU3 and later.


admin:utils cuc encryption ?
utils cuc encryption [enable | disable | status]
admin:utils cuc encryption status

Encryption Mode: Disabled


I'm not finding much yet on CUCM 11.0 talking to a PLM 11.5 with the
encryption license, if I rehost the licenses to the CUC PLM instance
will CUCM 11.0 sync fine?

Or switch version reboot back to 9.x and upgrade unity to 11.5.1 SU2.




On Sun, Aug 27, 2017 at 11:57 PM, Erick Bergquist <erickbee at gmail.com> wrote:
> Ok, I was thinking about it being that.  Should have stuck to CUC 11.5.1 SU2.
>
> It was working fine for a week. Weird.
>
> So I wonder if I can rehost the licenses to Unity Connection 11.5 SU3
> and have CUCM 11.0 talk to PLM on unity connection 11.5.1 SU3 fine?
>
> PLM is co-located on CUCM 11.0 right now (not standalone PLM server).
>
> Thanks!
>
>
> On Sun, Aug 27, 2017 at 11:50 PM, Charles Goldsmith
> <wokka at justfamily.org> wrote:
>> 11.5.1su3 requires PLM 11.5.1su2, due to the change with the encryption
>> license:
>> https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/plm/11_5_1_SU2/releasenotes/cplm_b_release-notes-cplm-1151su2/cplm_b_release-notes-cplm-1151su2_chapter_01.html
>> Look at the first Note.
>>
>> YMMV, but I ran into a bug when I upgraded a PLM to su2 recently, it
>> wouldn't switch version, even after a reboot, got a vague error about
>> locking the database.  After waiting a few hours with no change, booted off
>> of the recovery CD and forced the switch.  No issues after that.  I had a
>> good backup, so wasn't concerned about forcing it.
>>
>> On Mon, Aug 28, 2017 at 12:43 AM, Erick Bergquist <erickbee at gmail.com>
>> wrote:
>>>
>>> Anyone having any issues with CUC 11.5.1 SU3 and PLM on a 11.0.1?
>>>
>>> (thinking about rehosting licenses to the 11.5.1 SU3 CUC node)
>>>
>>> It has been working fine for a week since the upgrade and today CUC
>>> threw a license error.
>>>
>>> PLM 11.0 shows a "Application Error" for the Unity Connection instance.
>>>
>>> I deleted the product instance from PLM, added it back and it picks up
>>> correct 11.5 version fine then on Sync gives "Application Error".
>>>
>>> I've reset the unity servers and call manager acting as PLM and same
>>> thing.
>>>
>>> I reset PLM to default demo mode, deleted the Product instances, and
>>> applied the licenses again.  I added Product instances back and it is
>>> not liking  Unity still. PLM has all 11.x licenses. PLM detects the
>>> unity version 11.5 correct but doesn't sync.
>>>
>>> Reason we're using CUCM 11.0 over 11.5 is due to phone depreciation in
>>> 11.5 with some model phones.
>>>
>>> Erick
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>


More information about the cisco-voip mailing list