[cisco-voip] SIP Video Calls - CUCM or VCS

[Matt Jacobson]

You can register your Polycom endpoints on the VCS with SIP or H323 with
whatever SIP URI or H323 ID of choice. Unless there are other requirements
you didn't mention, this should let you more easily connect calls to these
Polycoms by putting them on the VCS.

On Wed, Nov 29, 2017 at 9:42 AM, Anderson D'Assunção <
anderdassuncao at gmail.com> wrote:

> I know that CUCM can support 1.1.1.1 at ip or 1*1*1*1, but
>
> Do the CUCM or VCS supports SIP Video calls dialing like this?
>
> 1.1.1.1##2562
> 1.1.1.1#1420
> 1916568 at 10.10.10.10
> 191.191.191.191 at 10.10.10.10
>
>
> Is there any way to solve this kind of dialing to policom equipments?
>
> i'm not able to make sip trunks because they are Polycom standalone.
>
>
>
> I just would like to confirm if it's possible or not
>
> thanks and regards
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20171201/1a8859c4/attachment.html>