[cisco-voip] CUCM Trunk timer

[Erick Bergquist]

It’s 0 days and the same hours and minutes right?

It’s been like that for awhile as far as I recall next to the trunk
destination. Likely a cosmetic item.

I usually have only one destination per trunk and use route groups to order
how they are used.

Erick


On Tue, Dec 5, 2017 at 12:56 PM Jason Aarons (Americas) <
jason.aarons at dimensiondata.com> wrote:

>
>
> On a CUCM trunk, you have the status showing the duration it’s been in
> service, then under SIP information there is another timer for the
> individual links.
>
>
>
> CUCM is showing a difference in the timers.  Do you know why that is?
>
>
>
>
>
>
>
> Jason Aarons, CCIEx2 No. 38564
>
> Advanced Technology Consultant
>
> Dimension Data
>
> 904-338-3245
>
>
>
>
> This email and all contents are subject to the following disclaimer:
> "http://www.dimensiondata.com/emaildisclaimer"
> <http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20171206/154f244e/attachment.html>